Petrothene GA502024: specs and equivalent grades
LyondellBasell pelletized LLDPE for cast film, with higher antioxidant levels and no slip or antiblock. Published data, grades from other producers to ask about, and how to request a quote from one gaylord.
Request a QuoteThe short answer
Petrothene GA502024 is a pelletized linear low density polyethylene from LyondellBasell's GA502 series, made for applications that need drawdown and toughness. It is formulated with higher antioxidant levels for cast film and carries no slip or antiblock. It is available in North America. Published melt index is 2.0 g/10 min, measured at 190°C / 374°F, 2.16 kg, ASTM D1238, and density is 0.918 g/cm³ (ASTM D1505). Grades from other producers to ask about include NOVAPOL PF-0218-F and Formolene L42022B. They are not identical, so compare the data sheets and run a trial before switching.
Buying Petrothene GA502024: one gaylord to a railcar · supplier COA on every prime lot · ships from 22+ partner warehouse locations · a polymer chemist checks the grade code before we quote · we aim to quote within one to three business days
Have a part number or drawing callout?
Paste it as written. A polymer chemist will tell you which grade it calls for, suggest equivalents and quote it by email.
Petrothene GA502024 specs from the data sheet
Typical values from LyondellBasell's published data sheet. Typical values are not specifications; the lot COA shows what you actually receive. Values only compare at the same test method and condition.
| Property | Value | Test method or note |
|---|---|---|
| Producer (brand owner) | LyondellBasell | Data sheet |
| Polymer | Linear low density polyethylene (comonomer not stated on the data sheet) | |
| Process | Cast film, compounding, sheet and profile extrusion; LyondellBasell says the GA502 series runs on blown or cast film lines | |
| Availability | North America (status: commercial, active) | Data sheet |
| Melt flow | 2.0 g/10 min | 190°C / 374°F, 2.16 kg, ASTM D1238 |
| Density | 0.918 g/cm³ (ASTM D1505), base resin and product | |
| Film test conditions | 1.5 mil film, 2.1:1 BUR | Data sheet |
| Dart impact, F50 | 120 g | ASTM D1709 |
| Tensile strength at break, MD / TD | 33.8 MPa (4,900 psi) / 24.8 MPa (3,600 psi) | ASTM D882 |
| Elongation at break, MD / TD | 750 % / 800 % | ASTM D882 |
| 1% secant modulus, MD / TD | 221 MPa (32,000 psi) / 248 MPa (36,000 psi) | ASTM D882 |
| Elmendorf tear, MD / TD | 170 g / 400 g | ASTM D1922 |
| Additives | No slip, no antiblock; higher antioxidant level for cast film | Data sheet |
| Food contact | The data sheet makes no food-contact statement; it refers to LyondellBasell's Product Stewardship Bulletin (PSB), a separate document from LyondellBasell. LyondellBasell lists food packaging film among its applications. Ask for the PSB or a regulatory letter for your use. | |
| Film test conditions (LyondellBasell) | 1.5 mil film, 2.1:1 BUR. Melt temperature, die size and output not given | LyondellBasell GA502024 TDS, Notes |
| Melt temperature for this grade | Not published on the data sheet | LyondellBasell TDS (publication date 10/31/2026): 'Specific recommendations for resin type and processing conditions can only be made when the end use, required properties and fabrication equipment are known.' |
| General cast film guidance (all polyolefins, not grade-specific) | Barrel 280 to 375°F (140 to 190°C) near the hopper, rising to about 555°F (290°C) at the die lands; cast film die 450 to 550°F (230 to 290°C); die opening around 20 mil (0.5 mm) for 1 to 3 mil film | LyondellBasell 'A Guide to Polyolefin Film Extrusion', linked from the GA502024 product page |
| Drying | Not required: LyondellBasell's guide says polyolefins are non-hygroscopic and do not need drying before extrusion | LyondellBasell 'A Guide to Polyolefin Film Extrusion' |
| Packaging forms | Not published on the data sheet | LyondellBasell TDS and product page |
Source data sheets are listed at the bottom of this page. Confirm against the current sheet for your exact grade code and color.
LyondellBasell's polyolefin film extrusion guide, linked from this grade's product page, says polyolefins are non-hygroscopic and do not need drying before extrusion; the grade's own data sheet gives no drying or temperature settings.
Grades to ask about instead of Petrothene GA502024
These grades from other producers have similar published specs. None is a drop-in replacement: additive packages, flow at molding shear rates, color and approvals differ. If your part, drawing or customer approval names Petrothene GA502024, any change needs your approval and usually a trial.
| Grade | Producer | Melt flow | Density | Key property | How it compares |
|---|---|---|---|---|---|
| NOVAPOL PF-0218-F | NOVA Chemicals | 2.0 g/10 min (190°C / 374°F, 2.16 kg, ASTM D1238) | 0.918 g/cm³ (ASTM D792) | Dart 100 g; Elmendorf tear MD / TD 110 / 330 g (1.0 mil film) | Close match. Butene copolymer LLDPE film resin with process antioxidant only (no slip or antiblock); NOVA lists stretch wrap, blend resin and industrial packaging. Same MI and density. NOVA states compliance with FDA 21 CFR 177.1520(c). Slip and antiblock versions are PF-0218-B and PF-0218-D. Quote this alternative › |
| Formolene L42022B | Formosa Plastics USA | 2.0 g/10 min (190°C / 374°F, 2.16 kg, ASTM D1238) | 0.919 g/cm³ (ASTM D1505) | Dart 65 g/mil; tear MD / TD 110 / 570 g/mil (25 µm blown film) | Close match. Gas-phase butene LLDPE for blown and cast film (blending, industrial liners and packaging, garment bags, coextrusion). L42022B has no slip or antiblock; L42022E2 adds 7,000 ppm antiblock and 1,350 ppm slip. Formosa states it meets FDA 21 CFR 177.1520. Quote this alternative › |
| DOWLEX 2047G | Dow | 2.5 g/10 min (190°C / 2.16 kg, ASTM D1238) | 0.918 g/cm³ | Dart 210 g (ASTM D1709A); Elmendorf tear MD / TD 640 / 510 g (ASTM D1922) | Flow higher (2.5 vs 2.0 MI); same density. Cast film grade for stretch wrap and hygiene backsheet film. Additives: no slip or antiblock. Values are from Dow's product page, which does not give the film gauge, density test method or comonomer; confirm on the TDS. Quote this alternative › |
| HIFOR LF2041 | Westlake | 2.0 g/10 min (190°C / 2.16 kg, ASTM D1238) | 0.918 g/cm³ (ASTM D1505, base formulation) | Dart 90 g (ASTM D1709); Elmendorf tear MD / TD 300 / 700 gf (ASTM D1922) | Flow and density same. Hexene LLDPE for cast and cast stretch film, with stabilization for cast extrusion; Westlake recommends cast melt temperatures of 500 to 540°F. Slip and antiblock not stated. Approvals: Westlake says it has some 21 CFR clearances and asks buyers to request a food-contact statement. Sheet dated 07/27/2022. Quote this alternative › |
From each producer's published data. Brand owners and grade names change; confirm on the current data sheet.
Typical uses for Petrothene GA502024
From LyondellBasell's data sheet:
- Bags and pouches
- Can liners and liner film
- Color concentrates
- Film wrap and stretch wrap film
- Food packaging film
- Lamination film
What to check before you switch
- LyondellBasell's sheet does not state the comonomer; both alternatives are butene copolymers. Confirm with LyondellBasell, or ask us, before you qualify one.
- Film data gauges differ: 1.5 mil for LyondellBasell, 1.0 mil for NOVA and 25 µm for Formosa. Compare dart and tear on your own film.
- GA502024 carries extra antioxidant for cast film. If you run cast film at high melt temperatures, check gels and color on any alternative.
- For a version with slip and antiblock, LyondellBasell lists GA502022 (0.923 g/cm³, 1,350 ppm slip, 7,000 ppm antiblock).
- Only two alternatives are listed here. If you can use an octene LLDPE, see our DOWLEX 2045G page.
- LyondellBasell keeps regulatory details in its Product Stewardship Bulletin, a separate document from the data sheet. Ask for the PSB or a letter for food packaging film.
- Compare melt flow, density and impact only at the same test condition and method (ASTM vs. ISO results differ).
- Ask for the producer's food-contact or regulatory letter for the exact grade if the part needs one.
- Run a trial lot and check shrinkage, cycle time and appearance before you switch production.
Buying Petrothene GA502024: price, lead time and lot size
- Lot size. From one gaylord to a railcar. See gaylord, LTL and truckload for typical weights per box.
- Where it ships from. 22+ partner warehouse locations. Material already in a partner warehouse usually moves sooner than a grade that has to come from the producer; your quote says which applies.
- Price. We do not publish prices because they move with feedstock, freight and order size. What moves your price most: lot size, color, ship-to region, and whether you need Petrothene GA502024 itself or can accept a matched alternative. See how resin is priced and the monthly market update.
- Paperwork. Supplier COA on every prime lot (what a COA shows). Ask for the producer’s regulatory letter or UL file if your part needs them.
- Trying an alternative? Start with one gaylord as a trial lot, molded and checked before you commit a full release.
- If Petrothene GA502024 itself is not available. Some branded grades are sold only through the producer’s own channels or go on allocation. If we cannot source it, we tell you, then quote a matched alternative with a side-by-side comparison.
Send the grade code, your annual volume and ship-to location. A polymer chemist checks it before we quote; we have been in the resin business for 30+ years. For several grades at once, use the resin RFQ template.
Trade names belong to their owners. ResinBridge is not affiliated with these producers; grade names are used only to identify the material. Data reflects published sheets as of October 2026.
Sources
- LyondellBasell Petrothene GA502024 product page
- LyondellBasell Petrothene GA502024 technical data sheet (PDF)
- NOVA Chemicals NOVAPOL PF-0218 series data sheet (PDF)
- Formosa Formolene L42022B data sheet (PDF)
- LyondellBasell: A Guide to Polyolefin Film Extrusion (PDF)
- Dow product page
- Westlake: LF2041 TDS 07 27 22 0 (PDF)
- Westlake product page
Common questions
What is Petrothene GA502024?
Petrothene GA502024 is a pelletized linear low density polyethylene from LyondellBasell's GA502 series, made for applications that need drawdown and toughness. It is formulated with higher antioxidant levels for cast film and carries no slip or antiblock. It is available in North America.
What is the melt flow of Petrothene GA502024?
2.0 g/10 min (melt index), measured at 190°C / 374°F, 2.16 kg, ASTM D1238, per the published data sheet.
What is equivalent to Petrothene GA502024?
Grades from other producers to ask about include NOVAPOL PF-0218-F and Formolene L42022B. None is identical; compare data sheets and run a trial, and get approval if your part names Petrothene GA502024.
Is Petrothene GA502024 food-contact compliant?
The data sheet makes no food-contact statement; it refers to LyondellBasell's Product Stewardship Bulletin (PSB), a separate document from LyondellBasell. LyondellBasell lists food packaging film among its applications. Ask for the PSB or a regulatory letter for your use.
Can ResinBridge quote Petrothene GA502024?
Yes. Send the grade name and volume. A polymer chemist checks it and we quote the grade where we can source it, or a matched alternative, and say which one. Orders start at one gaylord; U.S. and Canada only.
If your grade is not listed, tell us what you run. We source commodity, engineering and specialty resins.
Need Petrothene GA502024 or an equivalent?
A polymer chemist reviews every request, then matches your grade or finds a matched alternative and prices it.
What to send for an accurate quote
- The grade name, from any supplier, or a data sheet
- Color (natural, black or a custom match)
- Fill type and percentage, if any
- Melt flow, if you know it
- Quantity for this order and what you use in a year
- Ship-to city and state or province
Quote Petrothene GA502024 or a matched alternative
A polymer chemist checks the data sheet and tells you exactly what you would get before you order.
Request a QuoteNot sure which grade fits your part?
Send the grade you run now, or describe the part.